View Single Post
Old Jul 15, 2002, 04:37 PM
PierreVC is offline
Find More Posts by PierreVC
Registered User
PierreVC's Avatar
Brussels, Belgium
Joined Feb 2002
75 Posts
Thanks to all

Finally I ordered the HS85BB with the hitec longer servo arms.
I would have prefered the DS361/368 servo's due to the 4 mounting screws but, I've red there was an issue using the DS361/368 with a Futaba PCM receiver.
So as I'm using a Futaba FF8 transmitter I don't want to take the risk to buy these expensive servo's and not be able to use them.

I still need to decide regarding the gyro, I would love the GY401 and his digital servo and be able to control the gain and switch between the normal and heading lock mode from my transmitter.
But there is a big price difference and a lot of people seem to be happy with the GY240 + the HS81(MG).

The theoretical max headspead using the fun600-15 and a 15T pinion is about 1420rpm, but I found some posts where the real headspead is like 25% higher.
So is it better to make your esc run at 75% using a 15T or to use a 14T pinion and running at 85%?
I'm still a beginner and I don't need a 3d setup, just duration.

So know I just have to start building my logo10,

PierreVC is offline Find More Posts by PierreVC
Reply With Quote