View Single Post
Old May 08, 2005, 02:13 PM
mdttb is offline
Find More Posts by mdttb
Registered User
mdttb's Avatar
United States, CA, Stanton
Joined Jan 2004
2,012 Posts
Mount the HS-56 from the inside. In other words have the servos mounting tab holes on the inside of the frame. You'll have to take off the one mounting tabs on the 56s so they'll slide in from the back. The linkage may not be straight up and down put it'll be a lot closer then what you have now.

Just FYI before you screw the ball linkage screw in you should use a little bit of CA on the screw as the hole seems slightly larger for the screw.
mdttb is offline Find More Posts by mdttb
Reply With Quote