The fuse is together. Thank goodness everything is even. The CA/kicker only gives you one chance. The picture shows all the gear in the cockpit. I put a piece of velcro lengthwise in the cockpit. Now all the gear/batteries can be moved around depending on the COG adjustment desired.
I have been meaning to get this suggestion in here........ and since Timbits checked with the CA experts......
If you want more time to join the fuse halves then use medium CA and skip the kicker. Once you join the fuse glued halves together tape with blue painters tape. A ring around the tail boom end, at end of tail boom by the motor, the cockpit and nose. Use pieces of wax paper under the tape over any seam where the glue might come in contact with the tape.
You can see the extra brushless upgrade wire sitting there by the Xtal in the lower left.