Originally Posted by Basil
TURNS OUT THIS IS HAPPENING ALL OVER!!!
Who else is having problems?
If this setup is the BP21
from BalsaPR, I dont have a problem at all with the motor or the ESC.
I have used the 2 combined on a 10oz 3D Foamie. Worked great with 3 cells (TP 1320 G2). The ESC itself works great with Ryans Double CDR motor and I have run the BP21 motor with a CC10. No problems at all.
I didnt experience any of the issues you listed above.
Have you tried different ESC's with the motor?