View Single Post
Old Mar 10, 2014, 01:59 PM
Otto Dieffenbach is online now
Find More Posts by Otto Dieffenbach
United States, CA, San Diego
Joined Aug 2011
2,888 Posts
Servo and Control Horn Installation

Since we are flying with two batteries the CG requires the servos in the rear. This helps to provide a strong, short linkage between the servo and the horn. I mount the servo in the side and glue it to the side and top plate. I fabricate a horn from ply and soak the horn around the linkage holes with thin CA, then re-drill the holes.
Otto Dieffenbach is online now Find More Posts by Otto Dieffenbach
Reply With Quote