View Single Post
Old Aug 28, 2004, 03:05 PM
JIMinKENTUCKY is offline
Find More Posts by JIMinKENTUCKY
United States, GA, Columbus
Joined Mar 2002
1,125 Posts
Quote:
Originally Posted by electrafast
Just got mine done. Haven't flown yet.
Interested if anyone has a comment on the angle of my elevators as shown in my picture.

Electrafast, nice looking plane. Elevators look about the same angle as mine. Should be fine. Are you using Castle Creations 25 amp esc's? Thats what I used and didnt have any luck with them. Motors would vibrate back and forth too much before finally spooling up. Would be ok if both motors did this but sometimes one would just sit there and vibrate back and forth while the other would spool up like normal. Not good. They were new contollers. bought 2 more from Splash and they did the same thing. I tried a jeti 18 advance and the throtle control is much smoother and more consitent on start up. Let me know if u have any issues with your motor and esc combo. The motor im using is the hmax 3600. Jim
JIMinKENTUCKY is offline Find More Posts by JIMinKENTUCKY
Reply With Quote