Thread: Build Log Full Carbon Molded DeX Quad
View Single Post
Old Jun 28, 2013, 07:54 AM
DeXX is offline
Find More Posts by DeXX
DeXX's Avatar
Croatia
Joined Nov 2009
521 Posts
after flashind and changing the wires I've also put a new transparent heat shrink tubes on all ESC's

then it was necessary to remove heat shrink tube from the aluminum ESC heatsink...
so that the heatsink will have good thermal conductivity....




and to achieve the best thermal conductivity I have used thermal silicone from old ESC
It was enough to cover just a half of ESC with thermal silicone because when attached only half of the ESC heatsink will touch the main heatsink




before gluing the main heatsink I've made some holes for zip ties on it...




ESC's fits perfectly..... even though only half of the ESC's is touching the main heatsink.... It will be enough for perfect thermal conductivity








I only need to connect the wires to finish this chapter with cooling

.
DeXX is offline Find More Posts by DeXX
RCG Plus Member
Latest blog entry: FPV Bullseye
Reply With Quote