View Single Post
Old Mar 08, 2013, 11:28 AM
Highly Grounded is offline
Find More Posts by Highly Grounded
Autopilot no control
United States, FL, Fort Lauderdale
Joined Feb 2013
295 Posts
Arr0w, I had similar situation with throttle not registering zero and it was due to me using heavy pressure when calibrating like others have replied. I could see it when looking at the display settings, the throttle bar would move lower when I engaged throttle kill and back up with kill off, of course all with the left stick down. I did a light handed recal and everything has been operational since then.

I know you say it is something physical, but perhaps you are still using too much force. Play with the sticks in the display screen and see how the bar reacts to the pressure you use when you throttle up and back down. I stress the light handed recal because, in my case, too much pressure was actually enough to make the engines spool at zero. If you are not spinning up, but not registering zero, then perhaps you are just a hair heavy during the 0004 calibrate step.
Highly Grounded is offline Find More Posts by Highly Grounded
Reply With Quote