Well, here it is with the arms lengthened. Put carbon arms on there also instead
of the wooden ones. I like the carbon much better.....stiffer and straighter.
I also put different motors....went from the Suppo A2212-11 to the HT DT700's
to accommodate the larger 11x4.7 props.
I also bought preflashed ESC's.....highly recommend buying ESC's that come
already flashed if your not sure about how to do it.
Tried flashing the esc's on the first set up and motors ran twitchy
and the esc's were beebing all over the place..
I probably didn't do it right.
This runs very smooth
Now I just have to tune it all up
I'm running it with two 20-30c 1500 batteries using a 2-Pac HD dual battery
system shown here: http://www.rcdude.com/servlet/the-19...Battery/Detail
My only concern is that it weighs 3lbs and hovers at almost 3/4 throttle.
Any thoughts on that?