Thread: Discussion DragonOSD+V2 with RTH
View Single Post
Old Feb 12, 2013, 07:07 PM
Mike Freas is offline
Find More Posts by Mike Freas
KK4NOP
Mike Freas's Avatar
United States, VA, Virginia Beach
Joined Aug 2005
3,455 Posts
A bit more tinkering tonight and I believe I fixed my channel assignment issue. I set the radio type to other and now my channel 3 and 4 settings do not change like they were before. Not sure why this is but it doesn't matter.

Installed a Y on my ailerons allowing me to plug the ESC into the OSD. Now the OSD has the capability to control all aspects of my plane. If I don't like the throttle management a simple OSD change will disable it.

I also played around with the mission planner and was able to plan and upload three test missions to the OSD. The process was fairly straight forward. I assume the altitude section is the desired altitude the aircraft will fly the flight plan? If not it's easy enough to change.

I am still trying unsuccessfully to get the other DOSD software tool but I'm getting a bit of help on that end. Hopefully I'll figure out what I'm screwing up.

So, hopefully this weekends flights will start to test/adjust the AP.
Mike Freas is offline Find More Posts by Mike Freas
Reply With Quote