View Single Post
Old Feb 05, 2013, 02:12 PM
ganobile is offline
Find More Posts by ganobile
Guilherme Anobile
São Paulo - Brazil
Joined Jan 2007
13 Posts
Quote:
Originally Posted by Buschbarber View Post
You can connect a battery to any of the ports on that receiver. They all share the same Buss. You can connect a Y Harness to any servo port and connect a battery to one side and the servo to the other.

I don't have the R921 in front of me, but I believe it has a separate Bind/Bat port and a separate Data Port. You can connect a Y Harness to the Bind/Bat port so you can connect a battery to one side and Bind through the other side. You can connect a Y Harness to the Data Port and connect a battery to one side and a Flight Logger or Telemetry Module to the other side.

I had a situation where I needed to use a Voltage Regulator for the Rx battery. It was connected between the Switch Harness and the Rx. I could no longer Bind through the Switch Harness Charge Jack so I needed to connect a Y Harness to the Bat/Bind port.

These are the only situations where I use a Y Harness in larger aircraft.
Nice. Thanks! You gave good Ideas
ganobile is offline Find More Posts by ganobile
Reply With Quote