View Single Post
Old Feb 05, 2013, 07:04 AM
ganobile is offline
Find More Posts by ganobile
Guilherme Anobile
São Paulo - Brazil
Joined Jan 2007
13 Posts
Quote:
Originally Posted by crazy8s View Post
Do you still have the owners manual to the R921X receiver? Look at the topic about "Power Requirements". They are pretty much telling you that you should be using a power source that NEVER drops below 4.8 volts with the servos under a real load. Even tho the voltage cutoff is 3.5 volts JR wants you to stay above 4.8 as a minimum! If this was my large scale P-47 I would never even consider using 4.8 volt battery packs in a 2.4 GHz system! You are leaving yourself with practically no safety cushion. Look at all of the high torque servos you are running. Even in my smaller planes I use 6 volt battery packs for very real safety reasons. BTW, the receiver can handle the servos easily, it's the batteries that you are going to use that are the weak link.
Thanks a lot for your considerations, so do you thinks use two LiFe 2100 mah 6.6Volts is a good option?
ganobile is offline Find More Posts by ganobile
Reply With Quote