View Single Post
Old Feb 04, 2013, 11:02 AM
abriosi is offline
Find More Posts by abriosi
Registered User
abriosi's Avatar
Joined Jul 2011
240 Posts
Originally Posted by wetpanda View Post
Hi Guys.

First of all a thank you for all of the excellent information here that has made my build (almost) plug and play, with all of the information available (especially Mochaboy's excellent videos) I have had all the answers before I had the questions.

Now for my first issue

I am using:
Crius AOIP v2
MegapirateNG 2.8 R3
Spektrum Dx7 + AR7000

On my first run through the config, I set the TX as TX_Set1 (as it looked like the obvious selection for my setup). But in Mission Planner the controls were all random, throttle controlled roll etc. so I swapped to TX_mwi and now everything is on the right stick.

The issue is Yaw and Roll are reversed. For example to arm I need to go bottom left not bottom right. I have been through the options on my TX and can't find an option to reverse the inputs in airplane mode (it is there in heli mode) so hoped there was a config option.

Thanks for your help.
Select Tx_Set1 and try some different combinations with the cables till you get it right
abriosi is offline Find More Posts by abriosi
Reply With Quote