Thread: Yippee! HK Specter 1800
View Single Post
Old Feb 03, 2013, 06:51 AM
YEAP CHIN POH is offline
Find More Posts by YEAP CHIN POH
Registered User
Penang, Malaysia
Joined Jun 2002
415 Posts
Hi

- My CF was of the correct length
- On mine the length My leading edge fitted just fine.
- Yes the metal pins fit into the leading edge of the wings. The protruding pins face downwards
- Yes you will need to drill holes in the wings to mount to the fuselage. this has to be done with precision. You will also need to back the trailing edge with 1/32 " airplane ply. This was not provided in the kit.

I would also recommend you fit a metal wire into the wing root to insert on the other wing. This would prevent the wing from rotating when assembled.

The QC of this kit is poor. The wood selection was terrible on mine. One side of the wing was heavier than the other. One side of the stab was thicker than the other. Good luck.
YEAP CHIN POH is offline Find More Posts by YEAP CHIN POH
Reply With Quote