Originally Posted by Wasp09
Can you confirm the Master CP and V400D02 use the same "ESC"?
When I replace the RX on my V400D02 with the Master CP RX (after reversing all 3 servos), my D02 did not seem to have enough power to take off in spite of playing with the pitch curve.
To my understanding, master CP and V400D02 use the same motors. I wonder if we need a different ESC to match the RX.
I cannot set throttle to higher than 100% on my Devo 7 Tx.
It is rather unlikely that the master CP RX has scaled down the throttle because the master is smaller and lighter than V400.
My batteries were a bit weak idling through the cold winter... I am recharging them to see if it helps. The master CP RX does have a tigher power check than the original V400 RX.
I can't confirm what the differences are, but I am positive they are not the same.
I have signal converters for both helis and they are different and the difference is the throttle output signal. Several tried the converter from the V400 on the master and had throttle range issues.