View Single Post
Old Feb 02, 2013, 05:46 PM
ryyoungs is offline
Find More Posts by ryyoungs
Thumbs in training
ryyoungs's Avatar
United States, OR, Damascus
Joined Feb 2012
127 Posts
Quote:
Originally Posted by LoneWolfRC View Post
Digital servos jitter. I am not sure about your experience, so if you have not used digital servos before, I'd make a video to illustrate the problem either to JR/horizon, or for us--there can be too much jitter.

Also, what ESC/BEC or battery are you using? If you're using servo extensions, what is the gauge of the wire compared to the wire coming out of the servo. I've not witnessed this, but I have heard that noisy power from a BEC can cause jitter too.

Also, try it on a different channel...jitter could come from a pot in your transmitter. If your transmitter has a monitor function, take a look. Also make sure you don't have expo in the wrong direction. Also search around youtube....some peole have reported that a different servo can induce noise on other servos, leading the other good servos to jitter. For example, see this demo. It might help you trouble shoot your setup.
Thanks for the info. I'm running the recommended Airboss ESC w/o a BEC. The servo extensions are the same gage as the servo wire and all my expo is fine. I wish I would have read your response before I switched out the servo to try some of your trouble shooting ideas. I did show the guys at my LHS what it was doing and they said it was the servo. These guys are pretty knowledgeable.

If it is the pot on my transmitter what's the fix for this?

I didn't think about making a video of it. I need to be better about thinking about video. Just like I wish I would have had video of me climbing 30+ feet up into a tree to recover my plane when I was first learning to fly.
ryyoungs is offline Find More Posts by ryyoungs
Reply With Quote