Thread: Discussion MJX-F45 Single Rotor FP
View Single Post
Old Feb 02, 2013, 02:13 PM
Rollmops67 is offline
Find More Posts by Rollmops67
Eternal beginner
Rollmops67's Avatar
France, Alsace, Strasbourg
Joined Jun 2012
673 Posts
Quote:
Originally Posted by tiggertoo1962 View Post
Hey guys

Decided to do the tx mod in case I happen to buy a bunch of "wrong way round" servos. That way I have a radio for either scenario .

So that's the tx open, now which 2 wires do I have to change to reverse the direction of the aile so my servo doesn't make me drift in the wrong direction? Are they at the stick or is it something on the pcb itself?

Thanks
Fin
You see at 2 sides of each stick there are 2 little PCBs with 3 wires arriving, yellow - red - black.
On the other side of these PCBs are the potentiometers.
You just have to invert the yellow and the black one on the PCB where sits the potentiometer of the aile.

Roland

Edit :
Tigger you posted at the same time as me !
to find the potentiometer of the aile, move your aile stick, it's the one were the axis is turning (hope I'm clear enough ?)
If you are in mode 2 (Mode 4 on the TX) it's the one at the bottom of the first foto.

Edit 2 : F45 allready repaired, I had spare blades !
And you can come to visit when you want.
There is even a Bierstube at 300 meters ! (Like I said, a nice place !)
Rollmops67 is offline Find More Posts by Rollmops67
Last edited by Rollmops67; Feb 02, 2013 at 02:25 PM.
Reply With Quote