Originally Posted by tiggertoo1962
Decided to do the tx mod in case I happen to buy a bunch of "wrong way round" servos. That way I have a radio for either scenario
So that's the tx open, now which 2 wires do I have to change to reverse the direction of the aile so my servo doesn't make me drift in the wrong direction? Are they at the stick or is it something on the pcb itself?
find the potentiometer for the servo you wish to reverse.
You will see 2 wires, on to one side and one at the center. On the opposite side, there is an open terminal. Remove the outside wire and resolder it to the terminal on the opposite side. It is then reversed.