View Single Post
Old Feb 02, 2013, 12:50 PM
David Hogue is online now
Find More Posts by David Hogue
Blew out my flip flop
David Hogue's Avatar
USA, NC, Clayton
Joined Feb 2001
6,021 Posts
Gene,

The pdf that Joe wrote that info in is no longer on the Castle site, but I found the info here, posted below as well as the link I found the info at:

http://www.rcgroups.com/forums/showt...ighlight=multi

Quote:

A typical twin set up is:

• One ESC for each motor Y harnessed on the receiver, both BECS enabled.
• One large battery Y harnessed to the ESCS, keeps the same voltage to each ESC
• Change ‘Throttle Type’ to ‘Fixed’
• Change ‘Cut Off Type’ to ‘Soft Cut Off’

The goal here is to keep both motors running at the same speed and to not have one cut off completely at ‘Low Voltage Cut Off.’

Bernie
Quote:
Joe added:

Current limiting disabled as well.
David Hogue is online now Find More Posts by David Hogue
RCG Plus Member
Last edited by David Hogue; Feb 02, 2013 at 11:23 PM.
Reply With Quote