Thread: New Product Parkzone's VisionAire
View Single Post
Old Feb 01, 2013, 08:51 PM
d2tw4all is online now
Find More Posts by d2tw4all
Registered User
United States, RI, Smithfield
Joined Dec 2011
779 Posts
Quote:
Originally Posted by Cloud_Buster View Post
Are you using a DX6I by chance??? Mine did the same thing when it was in GF mode.. Sounds like yours is in GF mode now. All I had to do was flip the Channel 5 / Gear switch to put it in 3D mode.. You'll have full use of the elevator there.
I have no problem taking off and even doing some scale flying in 3D Low Rates and you can even do a lot of simple 3D stuff in low rates as well.. Low rates are set at 70%.. High Rates are 100%.. I don't even use the GF mode anymore for that same reason of not having much elevator..
AND we have a winner! Gear switch did it. I reversed the gear channel so it's by default in 3D mode. No idea why it defaults to that goofy anemic mode. SO glad. Now I just have to cut off the EC3' and solder on deans and she'll be set for tomorrow!

Tom
d2tw4all is online now Find More Posts by d2tw4all
Reply With Quote