Thread: Discussion How fast can this go...
View Single Post
Old Feb 01, 2013, 04:11 AM
Mreyello is offline
Find More Posts by Mreyello
Registered User
Mreyello's Avatar
Deutschland, RP, Niederzissen
Joined Dec 2011
943 Posts
Hallo Rob,
For a Ninja-Speed sized Speeder i would take a bigger motor.
Erwin Schaumburger (the designer of the ninja) made some other interesting scratch built projekts as the 2/3 or 4/5 ( these Numbers are more or less the size compared to the Nina)

The 2/3 may be a little small for that Motor,its designed for Funjet-drives, but it may work when you keep airframe light.
I run my 2/3 with HK3026-1400 at 6S and 7x10 but will change to a lighter Drive soon.

http://www.rc-network.de/forum/showt...Funjet-Antrieb

The 4/5 was designed for up to 10S, Schiwo scored 380Km/h with a 3226-900 Kv at 10 S and 7x10.

http://www.rc-network.de/forum/showt...peeder-bis-10s

Your motor will not be able to take more than 6 Cells with reasonable props,so i would have a closer look at Erwins newest design,the Gixxer:

http://www.rc-network.de/forum/showt...ell-der-Gixxer

This Plane is designed arround 250g outrunners and 6 Cells,with your Motor, 6S 3000 and 7x10 i would expect speed arround 350Kph.

For all this planes it is possible to get Plan,CNC milled kit and wingcores.

Regards
Yello
Mreyello is offline Find More Posts by Mreyello
Reply With Quote