Thread: Discussion Ecureuil AS355N
View Single Post
Old Jan 31, 2013, 05:55 PM
SRWitt is online now
Find More Posts by SRWitt
Registered User
Joined Jan 2011
112 Posts
Discussion
Ecureuil AS355N

Just a screen shot of what I'm currently working on. I'm working on designing a scale fuse for my Blade 4003d. This is just a couple hours worth of work/tweaking. I should have the foreward parts of the cabin done in the next couple of hours. Once I have a surface model built I will start extruding formers to build up the fuse out of Balsa/ply with. Plan is to build it like a plane, stringers on former, with thin sheeting in between. Sand to final shape, maybe a light layer of glass. At that point I will work on test fitting to the helicopter chassis, once fitted it will get disassembled and painted. Not sure of a time table on this project just something I'm working on in my spare time.

I'll also be working on doing the 22" J3 cub I've been working on in a 2d package, get it into the 3d package and refine the design there.
SRWitt is online now Find More Posts by SRWitt
Reply With Quote