View Single Post
Old Jan 31, 2013, 11:55 AM
Billz_01 is offline
Find More Posts by Billz_01
Australia, NSW, Newcastle
Joined Jun 2012
314 Posts
Vrex, earlier on in this thread the guys were talking that the Hyperion 180 and 240's are the go, as they have a lower internal resistance and provide stable power for longer through the pack.

I have absolutely no doubt that it won't be as efficient without 2S if that is what it requires. I'm trying to find out what the specs are on the motor, and will have a better look tomorrow, (I'm in Aus, it's 4:49am here and I need to get some sleep). From what is floating around, it could be possible that it might be stronger than the stock nano motor with a 1S esc and battery. In which case it is a win. If it is not, I will not have mutilated my frame, or anything else beyond repair, and will still be able to perform either of the normal brushless mods.

I think I'm prepared to take the risk on the motor not being sufficient, as there is only $20 to lose, but much more to gain if it is a success. (Replacement stock motors at my LHS cost me about $12 and I'm on my 3rd).
Billz_01 is offline Find More Posts by Billz_01
Reply With Quote