Thread: Discussion DragonOSD+V2 with RTH
View Single Post
Old Jan 29, 2013, 07:11 AM
Vantasstic is online now
Find More Posts by Vantasstic
'FPV'er...not a "LOS'er
Vantasstic's Avatar
Las Vegas, NV
Joined Sep 2003
19,501 Posts
Quote:
Originally Posted by Mehari View Post
I have a DLUHF/DOSD setup on my Easystar II controlled from an Er9x. The camera pan/tilt servos are operated by pots on the Er9x using two channels of the DL receiver.

While there is very occasional chatter in the rudder/elevator/aileron servos, the chatter in the pan and tilt servos is constant and sufficient to be a nuisance in the video image.

Is this an Er9x issue or is something else triggering the noise such as the BEC powering the receiver?

Any suggestions?
What servos and video freq are you using? I had servo chatter issues with cheap (HXT-9G) servos and 900MHz VTX. I replaced them with higher quality servos (Spektrum/HS-55 type) and the chatter disappeared.
Vantasstic is online now Find More Posts by Vantasstic
Reply With Quote