Originally Posted by DamonH
You should be able to do it Gold but you will probably have to lose some of the functions, i.e. "y" the yaw (rudder tv) to the rudder channel. That would free up a channel. If you want to hook both the 2d/off/3d and be able to change gain from the radio you will need two empty channels on your receiver. Again this is doable but you will probably have to y one of the other tv axis to it's corresponding channel. What you lose when you y them in is the ability to turn that tv function off.
I do not want the TV to be used at all anyway!. I wish there were a way just to disable the TV compleatly!