Originally Posted by BlackBeast
According to the specs it should noyt draw more than 43A.
Turnigy L2855-2800 EDF Outrunner (630w)
Kv: 2800 rpm/v
No load Current: 2.8A
Max Current: 43A
Max Power: 630W
Shaft Size : 4mm
Shaft Length: 16mm
Dimension: 34mm x 28mm
Do you think it will hold it?
The motor will hold and work fine but the load voltage in this data is kinda low....the thrust and amps will go up...around 60ish amps...3lbs - ish thrust IIRC