Originally Posted by BlackBeast
Is this test with CS-10 and Turnigy L2855-2800 EDF Outrunner (630w) ?
Turnigy Nano-tech 4S 2650mah, 85amp Turnigy super brain ESC, Turnigy L2855-2800 EDF Outrunner, Change Sun 10 Blade fan/shroud.
Motor is kinda loud but maybe will sound different in the air.
I throttled up slowly just in case the fan decided to detonate or slide off. I think I finally have the grub screws working ok now.
Probably would have peaked over 50amps on a hard throttle up I'm guessing. I should have checked the watts too... next run up.