Originally Posted by Old_Robin
Any dimensions for the tail feathers for the Red Baron to match the wing. Plans (hand-sketch of dims) would be good as it is by far the best proportioned looking plane I have seen for a while and with your excellent finish looks superb. Tempted to get out the Depron straight away"
Regards Old_Robin from the UK
Here are the dimensions, the top and bottom wing are the same.
The fuse length of 840mm is the longest edge of an A1 foamboard.
The nose cowling is the bottom of a 'Big Red' tomato ketchup plastic bottle.
Turnigy D2826-6 2200kv Outrunner Motor
2200mah 3S battery
40-50A Hobbyking ESC
Turnigy 3A ubec
Orange 6ch RX
Hobbyking 10g servos.
70mmx20mm foam wheels
I hope someone finds this useful!