Thread: New Product New Edge ESC
View Single Post
Old Jan 25, 2013, 08:47 AM
RC Man is offline
Find More Posts by RC Man
A man with too many toys
United States
Joined Feb 2001
19,582 Posts
Auxiliary Wire Mode

The AUX LINE is the extra white wire connected to the receiver cable. The EDGE controllers can use this line for a variety of tasks. The available options are listed below.


 Disabled
Disabled input and output of the AUX LINE.

 Gain Input
Allows an external throttle signal connected to the AUX LINE to adjust the governor gain of controller in real time.

 RPM Out
Toggles the AUX LINE for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.

 Arm Lock Key
This mode uses the Arming Lock Key Harness which attaches to the AUX LINE and the receiver. While the key is in the socket the controller will be incapable of arming. Once removed, the ESC will be allowed to arm when it receives a low throttle command on the traditional throttle line.

 RX Arm Lock
Locks the controller when the signal on the AUX LINE is below 50% (<1.5ms).

 Audible Beacon
Causes the controller to emit an audible beacon from the motor when the AUX LINE receives a signal over 50% (>1.5ms). The beacon is only emitted if the motor is not running.

.
RC Man is offline Find More Posts by RC Man
Reply With Quote