Thread: Discussion HK EPO Parjet, ARF
View Single Post
Old Jan 24, 2013, 12:47 PM
headlessagain is online now
Find More Posts by headlessagain
Reap the wild wind
headlessagain's Avatar
Bristol,UK
Joined Feb 2007
5,291 Posts
Here's my Flycat on a fairly modest power set up as described in the video info. Max speed in the mid 70's
Haoye Flycat pusher jet (3 min 40 sec)

Max size 3s lipo was 1600 but only after removing lots of foam. I glassed the fuse from front to beyond the wing leading edge as well as installing carbon flats.
Nice plane but be aware that the elevator looses a lot of it's effect at low speed and it can tip stall unless you keep the speed up
If you are planning a scratch build why not have a look at the SNice-mitar -Scimitar Wing Clone http://www.rcgroups.com/forums/showt...1499635&pp=100.
Similar planform and very nice design
Andy
headlessagain is online now Find More Posts by headlessagain
Reply With Quote