Thread: Build Log Plank 1mp
View Single Post
Old Jan 22, 2013, 01:04 PM
Jon Snow is offline
Find More Posts by Jon Snow
You know nothing....
Jon Snow's Avatar
Joined Sep 2011
3,626 Posts
After a bit of searching I realised the servo wasn't up to the job.I would have liked to have a pair of hs5125s,but a bit out of my budget.So 125s will do for now.If the thing proves it's worth I can treat it to an upgrade.With these being thinner there will be space above to shorten the wires and plug an extension in.
From what I've gleaned over on the slope forum a good start set up will be 7mm on the servo arm and 20mm from the hinge line with the horn.Couldn't find an off the shelf fit,so I picked up a sheet of 1/16 glass to have a go at making some.First attempt isn't bad.Think I'll cut this one in to get the linkage set and if ok make a pair to fit better over the tow.
Jon Snow is offline Find More Posts by Jon Snow
Reply With Quote