Originally Posted by SWAMPER
ok need a little help, After getting everything together it seems the top wing is not parallel to the bottom, the top seems a little twisted the center rods are not glued in but the outer strut rods are glued to the blocks that go into the wing pockets
How can I get the top wing adjusted to be parallel to the bottom ?
The top wing is not parallel to the bottom. The upper wing will have a slight negative incidence and the lower wing will be slightly positive. Adjust the rear wing mount so the two wings form an arrow. As for the twist, you may need to double check the wing strut lengths. Let me know if you need any parts to correct the problem.