Originally Posted by romano_st
i usually charge lipos at half their capacity, i use 2200 mah nanotech, as i noticed that they give more power and last longer then when i charge them with more current, they are rated for 10c but i would never try that, that is my opinion, max current i use is full capacity of battery in your case that would be 600 mAh
So you charge a 2200mah pack a 1.1A?
Waste of time, no pack has any issues with 1C (heck the 18650 cells i use in torches have no issues with 1C) and any decent one will be fine with 2C no troubles.
Minimum 1C, maximum whatever the pack states, maybe a bit less than that if it is a cheap pack (I dont think I would charge nano-techs at 10C, but would have no problems with 5C).