Thread: New Product Parkzone's VisionAire
View Single Post
Old Jan 21, 2013, 03:21 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Charlotte, NC
Joined Jan 2011
9,262 Posts
Originally Posted by imacav8r View Post
flew it and slightly disapointed.... there needs to be more gain available. i even bumped all the gains up to 100% in 3D mode and the surfaces barely react to changes when the plane is shaken. unlike the micros that bang the surfaces when shaken.
you can fly it as fast as possible, in 3D mode with the gains set to 100% and it will not oscilate in any axis. needs more gain.
Are you saying that that the gyro isn't reacting ENOUGH for you? Are you basing this purely on what you're seeing on the ground or based on how it flies?

I don't understand your last sentence. If you're flying fast you don't WANT it to oscillate on any axis right? It sounds like you want it to actually have TOO much gain.

The gyro is there to help out a little... it's not there as an autopilot.
turnerm is offline Find More Posts by turnerm
Reply With Quote