Thread: Question Turnigy 9XR
View Single Post
Old Jan 20, 2013, 06:55 PM
pmullen503 is online now
Find More Posts by pmullen503
Registered User
United States, WI, Fond du Lac
Joined Sep 2008
1,795 Posts
Quote:
Originally Posted by neale View Post
OK thanks for that info, I only got mine on Friday and have not had a chance to try it out much or read threads, I am married, and had to go flying as well!!
I take it from what you posted that I do not at this point need to load any other firmware to get it to work with spectrum, is that correct?
Thank you pmullen503
Neal
I'm pretty sure that is correct. I run a much newer version of the firmware but channel order should be on the first setup screen. You should not have to get into the mixer to change default channel order.

You really should change the order rather than just plugging the servos and ESC into different slots. Spektrum failsafe brings the throttle channel to zero in the event of signal loss and either holds last position or bind position depending on model of receiver. You wouldn't want to hold throttle and go to zero on one of your flight surfaces!
pmullen503 is online now Find More Posts by pmullen503
Last edited by pmullen503; Jan 20, 2013 at 07:05 PM.
Reply With Quote