Originally Posted by big bird
need a little help here - just got this little heli with the programmable Tx (I haven't changed any settings etc on the Tx)
thing is, it just won't fly at all. when you spool up (idle up in the neutral - backwards position) it just goes to tip over as though the gyro were fighting some force.
The gyro sensitivity in the Tx is set to "100" and "-100" on the two position switch
Any ideas ?
The heli has to rest on a 100 % horizontal flat surface when binding up to the TX.
If not, the gyro does not understand what is correct horizontal level.
The user manual pinpoint this important procedure.