Originally Posted by Doc Austin
If you can adjust that BEC, I suggest bumping it up to 6V. The servos are much less likely to stall or blow back when they have all that extra grunt, plus they are faster on the higher voltage.
I'm a big fan of the HS85MG, but you will have to modify the servo opening to get it to fit properly. It's not a hard job, but you might find this helpful....... Installing The HS85MG Servo On the Elevator
Thanks for the info. My BEC is set for 6v now.
Resizing the elevator hole for an 85 is one concern. That's why I'm considering the Savox, which I hear will drop right in.