Originally Posted by Rollmops67
On the transmitter, once powered, you DO have to go at 100% with the throttle (stick all the way up) and come back to 0% (stick all the way down) so the binding process can bee done.
Did you do that ?
yea wot roll said...
another easily missed issue, the 'stick change' mechanism, be sure the outside (appears to be trim controls labeled L-R) switches are either full up (for r side throttle/rudder) or FULL down (for std controls). If them 2 arent either full up or full down, binding wont happen.
also I found that in my abode, binding is hit/miss because of the 5 ea high power 2.4 gig wifi computer adapters I run. Perhaps you have a similar issue.