View Single Post
Old Jan 14, 2013, 04:17 PM
Dennis Frie is offline
Find More Posts by Dennis Frie
Just another user
Dennis Frie's Avatar
Denmark, Capital Region of Denmark, Naerum
Joined Feb 2011
1,368 Posts
Originally Posted by Spejlo View Post
ok.. finaly I got a little time to complete this OSD and test it on bench. works good.. but I have some minor issues ..

1. PPM init at start need some delay to be detected properly (50ms before check is good for me)
2. PPM min/max values for menu control need to be adjustable in config (openLRS have a bit different values)
3. i think PPM pulseTime should be little bit grater (but I'm not sure.. tomorrow I do some tests)
4. HomeHeading numbers at bottom is always ON in v10..

and logic of menu control should be in config in case someone has servo reversed

if I'm something overlooked in config please let me know
All in all, pretty nice feedback - thanks!

The problem with homehead in numbers was due to the GPS-coordinates. The plane-angle should have been another option never added. Have been fixed and will be included in next update
Dennis Frie is offline Find More Posts by Dennis Frie
Last edited by Dennis Frie; Jan 14, 2013 at 04:23 PM.
Reply With Quote