Thread: Discussion Parkzone Habu!
View Single Post
Old Jan 14, 2013, 02:41 PM
GryphonRCU is offline
Find More Posts by GryphonRCU
Registered User
GryphonRCU's Avatar
United States, CA, SF
Joined Mar 2008
4,033 Posts
Thanks for the reply Brian.

I believe i should have commented on E option.
Without the E, the above motor will turn bunch more RPM and draw more AMPs.

Since the internal resistance of the Mega is so much lower (better), if people don't want to run at higher power settings etc, they should consider this motor instead of the one I mentioned above:

16/30/1E with about 5% lower KV (due to E rotor $10) should easily run more efficient than other motors mentioned.

This Mega 6 pole and its very low internal resistance will not drop as many RPM under load compared to other motors. Read higher % KV under load.

At same Watts going into motor, it will put out more RPM than other mentioned brands.....more efficient and cooler.

At same RPM out, it will have fewer watts draw from battery than other brands mentioned.....more efficient and cooler.

***When trying to match a Mega to most other motors (power wise), slightly lower KV should be picked.

Just compare resistance numbers.
9 combinations of shaft and bearing options.

GryphonRCU is offline Find More Posts by GryphonRCU
Reply With Quote