Wicked Powered Tech One Neptune EDF
View Single Post
Jan 13, 2013
, 11:25 PM
Joined Jan 2002
Got some more work done tonight. The fan is mounted (I used hot melt glue). The ESC is soldered to the motor (I used an older Hobbywing 40 amp ESC I had in my spare parts box). I removed some foam to recess the ESC on the lower part of the fuselage and used hot melt glue to hold the ESC in.
The thrust tube is next.
View all Images in thread
Tabs removed off the EDF fan unit.
Fan unit hot melt glued into place
Wires soldered to ESC underneath
I used a dremel tool and removed some foam so the ESC will fit.
The ESC and battery leads in the battery bay.
Latest blog entry:
Indoor Free Flight columnist for Model...