View Single Post
Old Jan 10, 2013, 03:40 PM
ahamay is offline
Find More Posts by ahamay
Registered User
ahamay's Avatar
Australia, QLD, Gold Coast
Joined Jun 2012
292 Posts
Tarot ZYX Software on Windows 8 -Cleaning up drivers

Further to my post above #6444 - if you've installed the tarot ZYX USB drivers and they are not working on windows 8 by showing Error code 10 then you need to remove these driver and install the VISTA 64bit drivers which work fine.

To clean up your system from this driver installation you need to do the following:

With your dongle plugged in, right click on the non working entry in device manager and select uninstall and then tick the box to remove the drivers from the system.

Remove the dongle from your computer.

There will most likely be traces of this WIN7 64 bit driver still on your system. Do a search for the file "ser2pl64.sys" and delete them. They will most likely be in the following paths:

c:\windows\system32\drivers
c:\windows\lastgood\system32\drivers

Download the VISTA drivers from here -> PL-2303-WIN8.zip

Unzip them into a folder and then right click on the file "ser2pl.inf” file and then say install.

You should get a message saying the install was completed.

Plug in your dongle and check device manager whilst the drivers are loaded. You may need to reboot at this point if you get a message in device manager to do so.

The adapter should be working now using the VISTA 64bit drivers and you should have a driver version dated as per this image:



Jonesy
ahamay is offline Find More Posts by ahamay
Reply With Quote