View Single Post
Old Jan 07, 2013, 10:20 PM
jy0933 is offline
Find More Posts by jy0933
James not bond
jy0933's Avatar
United States, MN, Minneapolis
Joined May 2012
2,081 Posts
some interesting happens here when flashing my blueseries 12A

i got 2 of them unable to flash with tool from HK.. and i looked at the chip... the unable ones are Atmega8 instead of Atmega8A.

I have no clue what is going on....

Quote:
Flash the firmware file.

E:\ProjQuad\Esc\kkt\lib\avrdude\windows\avrdude.ex e -C E:\ProjQuad\Esc\kkt\lib\avrdude\windows\avrdude.co nf -p m8 -P usb -c usbasp -B 8 -e -U lfuse:r:E:\ProjQuad\Esc\kkt\tmp\/lfuse.hex:r -U hfuse:r:E:\ProjQuad\Esc\kkt\tmp\/hfuse.hex:r

avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: error: programm enable: target doesn't answer. 1
avrdude.exe: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.


avrdude.exe done. Thank you.

Error during reading of high fuse.
Flashing of firmware aborted.
anyone got idea what is going on here?
jy0933 is offline Find More Posts by jy0933
Reply With Quote