Originally Posted by epoxyearl
That flap system won't have much of a load on it...I believe you can take a piece of 4-40 wire (3/32"), and a couple of pieces of tubing,and make your own.A 3/32" nose wheel steering arm,installed along with the tubing,then making the bends will give you the same result.-for a couple of bucks.
1/16 " music wire will work, if you want strength,but I don't know of that small a steering arm.
I like your drawings.
Thanks EE, that's exactly what I was looking for. I did some searching for steering arms and came up with plenty of those plus some leads into just using a wheel collar with a threaded rod. Duh. So simple. Yes, I'll bend my own.
Dang, a fella takes a couple of decades off from building and forgets the simple stuff! Man, that's a long time though!
@lindart - yah... I DID remember that trick from my prior days.
Continuing to clear the cobwebs here!