This is my first Twin Cargo Plane, and its a lot a fun! Thanks foam and tape for the great design, and thanks larryross for all your hard work on the plans.
Of course I had to make a few changes of my own. My twin is made of EPP, with a 48" ws (85%) of the original.
Here are the Mix's I used to get the rudder and throttle differential on a DX7s.
Note: I saved the gear port for the back door and used the AXI port for the left motor.
THR > AXI
RUD > THR
RUD > AXI
Rate - 60%
I was able to brave the wind and cold today for some video. Enjoy!!!