Originally Posted by Banjo5
Cool & good inspiration. Got some more info on the components and general sizes you used?
its a kk board version 3 flashed with 1.5 . used a 9 gram tower pro servo, some 28by 22 mm 1000kv motors that came with the first quad kit i ever tried from good luck buy.props are 9050 3 blades.use a 2000mah 3 cell and hobbyking 18 amp escs. its 16 inches long and 17 inches wide between front arms.body is thin ply and arms from an old clothes drying rack found on the roadside. had alot of good strips for arms and dowels for future projects.the rear mech is just piece of wood with hole drilled in it and brass tubing inside with a wood screw holding it together