Thread: New Product Parkzone's VisionAire
View Single Post
Old Jan 03, 2013, 01:21 AM
ChuckTseeker is online now
Find More Posts by ChuckTseeker
Registered User
ChuckTseeker's Avatar
Adelaide Plains Australia
Joined Dec 2007
3,632 Posts
New Product
Parkzone's VisionAire

this looks cool parkzones new VisionAire BNF

cheers chuck

The ParkZone® VisionAire™ park flyer is specifically designed for sport pilots by 3D pioneer, Quique Somenzini. Its wings are constructed of hollow Z-foam™ material that has been reinforced with carbon fiber to create structures that are stiffer and lighter than solid foam. This rigid, lightweight airframe is paired with a powerful 10-size, 1250Kv brushless motor that delivers the vertical performance you need for an exhilarating 3D flying experience.

What makes the VisionAire such a great 3D plane for sport pilots is the advanced AS3X® (Artifical Stabilization – 3-aXis) System built into its AR635 receiver. The AS3X System works behind the scenes to counter the effects of wind and turbulence, using 3-axis sensing and flight control software tuned by Quique Somenzini. If you’ve never flown 3D before, this enhanced stability will give you the confidence you need to try high alpha maneuvers like harriers, hovers, torque rolls and more.

You can adjust the amount of stability the AS3X System provides or turn it off completely, but even 3D pros will find flying with it on feels completely natural. There is no delay in control response or limits on the control throws. You’ll simply feel like you’re flying an expertly tuned model that goes right where you point it.

Spektrum™ AR635 DSMX® receiver with AS3X® System, installed
Powerful 10-size BL outrunner, 1250Kv, installed
E-flite® 40A Pro Switch-Mode ESC with 5A BEC, installed
E-flite 13-gram digital micro servos, installed
Clear belly window for monitoring AS3X System status
Carbon-reinforced Z-Foam™ construction
Leading-edge vortex generators
Double-beveled hinges for large control surface throws
Durable wire landing gear and large wheels for flying off grass
Two piece wing for easy transportation and repair
Sharp, Mirco Pecorari signature trim scheme
Includes 3S 2200mAh 25C Li-Po battery
Includes 2- to 3-cell DC variable rate charger
Requires a full-range 4+ channel DSM2®/DSMX aircraft transmitter, sold separately

Wingspan: 45.0 in (1143mm)
Overall Length: 42.5 in (1088mm)
Wing Area: 539 sq. in. (34.8 sq. dm.)
Flying Weight: 43.7 oz (1240 g)
Motor Size: 10-size BL10 brushless outrunner, 1250Kv (installed)
Radio: AR635 6-channel DSMX AS3X sport receiver (installed)
Servos: (4) 13 g digital high-speed servos (installed)
Trim Scheme Colors: Blue, red
CG (center of gravity): 4.5 in (115mm) back from the leading edge of wing at wing root
Wing Loading: 11.7 oz/sq. ft. (35 g/sq. dm.)
Prop Size: 12 x 4
Spinner Size: 1.57 in (40mm)
Speed Control : 40-Amp Lite Pro Switch-Mode BEC Brushless (installed)
Recommended Battery: 11.1V 3S 2200mAh 25C Li-Po (included)
Control Throw (Ailerons): Low: 70% up/down, 15% expo; High: 100% up/down, 25% expo
Control Throw (Elevator): Low: 70% up/down, 15% expo; High: 100% up/down, 20% expo
Control Throw (Rudder): Low: 70% right/left, 10% expo; High: 100% right/left, 15% expo
Approx. Flying Duration: 6 minutes
Charger: 2-3 cell DC Li-Po balancing charger
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes

ChuckTseeker is online now Find More Posts by ChuckTseeker
Last edited by ChuckTseeker; Jan 14, 2015 at 03:21 AM.
Reply With Quote