Thread: New Product RangeLink UHF Long Range system
View Single Post
Old Jan 01, 2013, 09:26 PM
surf1punk is offline
Find More Posts by surf1punk
RC FPVer
surf1punk's Avatar
United States, FL
Joined Nov 2011
543 Posts
I just did some more testing in micro power mode. With only 1 servo and the battery/esc plugged in, and the Rx plugged directly into the antenna - I was able to get maybe 10 feet before failsafe, and the controls responded very jittery after a few feet away. I got the same results with everything plugged in and on, video, camera etc. I then did a test on just normal low power mode. Plane was inside, and I walked outside with the ground station and Tx. I was around 10-30% RSSI just 10 feet outside the house, maybe 50 feet total and 3 walls between.

Does this sound like this shows something wrong? I mean obviously after my flight today and only getting 600 feet before failsafe, something is off. I looked at both the Tx and Rx, and nothing looks fried or lose, the SMA connections on both feel fine, so I kinda don't know what to do at this point. BTW these are brand new, and my first flight with it was today.
surf1punk is offline Find More Posts by surf1punk
Reply With Quote