Thread: New Product Extreme Flight 48 inch Laser EXP
View Single Post
Old Jan 01, 2013, 06:25 AM
rimaarts is offline
Find More Posts by rimaarts
Registered User
United Kingdom, London
Joined Jul 2011
2,252 Posts
sooo, finally got all finished up! only 2 things left for later when i wont be too lasy! it is to shorten aeleron pushrods by 5mm, and move rudder pushrod 1 hole more in...

and i noticed that here cowl is longer (or motor box shorter?)than mxs! if on mxs i couldnt get a hacker to fit without LARGE spinner gap, here i will (if i decide to change)...

currently i have 800kv sunnysky mounted upfront! just tested that with xoar 13x4 its around 35-40A and around 600w (on nearly discharged battery) but vess 13x6 is around 55A and more than 700w and motor got warm after couple of sec of wot... so my guess is that xoar 13x5 would be the ticket since i dont want to spend for a new esc! and i figure if on mxs 750w was way more than enough, than 600w on laser should be acceptable, no? at least for maiden...
rimaarts is offline Find More Posts by rimaarts
Reply With Quote