Thread: Discussion micro EDF: need your advices
View Single Post
Old Dec 31, 2012, 03:18 PM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
United States, WA, Vancouver
Joined Mar 2012
740 Posts
here is what the stock SkyAngels 35mm fan does...on 3s with a 10amp ESC it puts out close to 6oz of thrust:

M2U01779 (0 min 0 sec)


here is what I used to "make it go":

stock SA fan and motor:http://www.hobbyb.com/skyangel-repla...0mr0ru3e97ejv2http://www.hobbyb.com/skyangel-rc-pl...html?cPath=143
5g servos X 2:http://www.hobbyking.com/hobbyking/s...arehouse_.html
turnigy 10amp ESC:http://www.hobbypartz.com/07e22-proton-10a.html
stock RX for CT6B:http://www.hobbypartz.com/79p-r6b-receiver.html
350-460mah 25-40c:http://www.hobbyking.com/hobbyking/s...Warehouse.html

heres the build thread:http://www.rcgroups.com/forums/showthread.php?t=1765490

also if you want to build a first jet you might give this one a go, the plans are for the "conventional" version, this one also easily flies on a 2s 350mah pack and is so lite with that pack it will take quite a smack with no damage, set your rates for elev to about 40% and the roll to about 55% and it flies like a trainer, after you get the feel of how it flies you can go with a 3s pack and it will go like ticked off hummingbird, build thread: (you'll need to go through this thread to find the 35mm version...which is what the plans are done on ) http://www.rcgroups.com/forums/showthread.php?t=1725467

and a vid with the 350 2s pack:

Xversion3 1YEAH (3 min 1 sec)


Joe
sloperjoe is offline Find More Posts by sloperjoe
Reply With Quote